Fast dissolving chlorine tablets (2,7g) for small pools & spas.
Chlorine tablets 2.7g, fast dissolving (min. 55% Cl.). Easy to dose: 1 tablet increases 1,000 liters of water with 1.5 ppm chlorine. Ideal for use in spas and small swimming pools. Can be used as chlorine shock, season start and continuous disinfection. Stabilizer protects chlorine against UV radiation from the sun. Very effective against algae and organic deposits.
Dosing instructions (practical advice)¹:
- Always correct the pH value between 7.2 and 7.6
- During treatment, the pump should be running for 3 to 4 hours
- Dissolve tablets in the skimmer or a floating dispenser
- 1 tablet increases the chlorine content of 1,000 liters water by 1.5 ppm
- Maintain the chlorine level around 2 to max. 5 ppm (mg/l). The dosage depends strongly on circumstances (temperature, sun and bath load)
- With this dosing recommendation, the cyanuric acid content may not exceed 70 ppm (mg/l) (overstabilisation)
- For continuous disinfection: every 1 to 2 days 1 or 2 tablets per 1 m³ of water
- In case of chlorine shock or the presence of algae: approx. 4 tablets per 1 m³ of water
- After chlorine shock, wait until the chlorine value has dropped below 5 ppm (mg/l) before using the pool again
¹May differ from label texts. Labels are always prepared according to national rules and regulations.
Warning:
- Use biocides safely. Always read the label and product information before use
- Keep in a cool dark place, out of the reach of children
- Do not throw the tablets directly into the pool. You can easily get bleach stains and damage the bottom of your pool.
- Always dissolve tablets in a floating dispenser or skimmer.
- Never mix with other (swimming pool) chemicals or other types of chlorine. These can react with each other. Chlorine gas formation may occur
- To avoid risk of skin and eye irritation, it is recommended to wear protective gloves and eye protection when handling this product
Tip:
- Note: Melpool Minitabs contain a chlorine stabilizer (cyanuric acid). This stabilizer protects the dissolved chlorine against UV rays from the sun, which can quickly break down the chlorine
- With long-term dosing, the water can become over-stabilised, this results in the chlorine no longer being active. Therefore, regularly change/ refresh part of the water. See explanation cyanuric acid
- If the pool is not in use, cover it! This prevents dirt coming into the pool and prevents UV breaking down the chlorine. In addition, the water can retain its temperature much longer
