Increases the total alkalinity for swimming pools.

Granules to increase the Total Alkalinity (TA value) of the pool water. A deviating TA value has a negative influence on the pH and disinfection. High-quality, fast-dissolving granulate.

Dosing instructions (practical advice):

• When the TA value is too low, the pH value can vary greatly. This can cause corrosion or staining
• If the TA value is too high, it is very difficult to lower the pH value
• The ideal TA value is between 100 and 150 ppm (mg/l). Values higher than 175 and lower than 60 ppm (mg/l) require an adjustment
• 150g of this product per 10 m³ of water increases the TA by 10 ppm (mg/l)
• Do not dose more than 300g per 10 m³ per treatment
• During treatment, the pump should be running for 3 to 4 hours
• Perform a possible second treatment only 12 hours after the first treatment

Warning:

• Always read the label and product information before use
• Keep in a cool dark place, out of the reach of children
• Do not throw the granulate directly into the bath, but dissolve it in a bucket of cool water. Then distribute evenly over the water surface
• Never mix with other (swimming pool) chemicals, always add the product to water, never the other way around
• To avoid risk of skin and eye irritation, it is recommended to wear protective gloves and eye protection when handling this product

Tip:
Use Melpool pH- to get the TA value down. See for more information and explanation about the Total Alkalinity (TA-Value).