pH increaser for swimming pools.

The pH value is important for optimal performance of chlorine/disinfection products. Too low a pH value can lead to corrosivity (filter pump). High-quality, fast-dissolving granulate.

Dosing instructions (practical advice):

• pH value should be maintained between 7.2 and 7.6
• 80g (= 80 ml) pH+ per 10 m³ of water raises the pH value by approx. 0.1
• Do not dose more than 300g (= 300 ml) per 10 m³ per treatment
• Perform a possible second treatment only 12 hours after the first treatment
• Dissolve the product in a bucket of cool water and then distribute it evenly over the surface of the water
• During treatment, the pump should be running for 3 to 4 hours
• Consult your supplier if the pH value needs to be corrected frequently

Warning:

• Always read the label and product information before use
• Keep in a cool dark place, out of the reach of children
• Do not throw pH+ granulate directly into the pool. You can easily get bleach stains and damage the bottom of your pool.
• Never mix with other (swimming pool) chemicals, always add the product to water, never the other way around
• To avoid risk of skin and eye irritation, it is recommended to wear protective gloves and eye protection when handling this product

Tip:
In practice, the harder the water, the more difficult it is to permanently change the pH value using pH+. See for more information and explanation about the pH value.